Closing the Yield Gap for Cannabis: A Meta-Analysis of Factors Determining Cannabis Yield
Crop Physiology Laboratory, Department of Plant Science, McGill University, Sainte-Anne-de-Bellevue, QC, Canada
Plant Systems Biology Laboratory, Department of Plant Science, McGill University, Sainte-Anne-de-Bellevue, QC, Canada
Biomass Production Laboratory, Department of Bioresource Engineering, McGill University, Sainte-Anne-de-Bellevue, QC, Canada
Ravenquest Biomed, Inc., Vancouver, BC, Canada
Abstract
Until recently, the commercial production of Cannabis sativa was restricted to varieties that yielded high-quality fiber while producing low levels of the psychoactive cannabinoid tetrahydrocannabinol (THC). In the last few years, a number of jurisdictions have legalized the production of medical and/or recreational cannabis with higher levels of THC, and other jurisdictions seem poised to follow suit. Consequently, demand for industrial-scale production of high yield cannabis with consistent cannabinoid profiles is expected to increase. In this paper we highlight that currently, projected annual production of cannabis is based largely on facility size, not yield per square meter. This meta-analysis of cannabis yields reported in scientific literature aimed to identify the main factors contributing to cannabis yield per plant, per square meter, and per W of lighting electricity. In line with previous research we found that variety, plant density, light intensity and fertilization influence cannabis yield and cannabinoid content; we also identified pot size, light type and duration of the flowering period as predictors of yield and THC accumulation. We provide insight into the critical role of light intensity, quality, and photoperiod in determining cannabis yields, with particular focus on the potential for light-emitting diodes (LEDs) to improve growth and reduce energy requirements. We propose that the vast amount of genomics data currently available for cannabis can be used to better understand the effect of genotype on yield. Finally, we describe diversification that is likely to emerge in cannabis growing systems and examine the potential role of plant-growth promoting rhizobacteria (PGPR) for growth promotion, regulation of cannabinoid biosynthesis, and biocontrol.
Untitled section
Keywords: cannabis, genomics, transcriptomics, chemotype, yield gap, light emitting diodes, PGPR, GWAS
Article notes
Untitled section
Received 2018 Oct 31; Accepted 2019 Apr 1; Collection date 2019.
Introduction: Changing Attitudes on Cannabis and Current Knowledge Gaps
Currently cannabis laws are changing rapidly around the world, with legalization of medical use appearing in many jurisdictions, followed by legalization of recreational use. In Canada, this has led to significantly lower barriers to obtaining a license to conduct scientific research under the newly adopted Cannabis Act, in comparison with the Access to Cannabis for Medical Purposes Regulations (ACMPR) and its predecessor acts: Marihuana for Medical Purposes Regulations (MMPR) and Marihuana Medical Access Regulations (MMAR) (Canada, 2001, 2013, 2016, 2018). However, in the United Sates, while recreational cannabis has been legalized in nine states and medical cannabis has been legalized in 21 states (http://www.governing.com/gov-data/safety-justice/state-marijuana-laws-map-medical-recreational.html), cannabis remains illegal at the federal level, presenting a major barrier to research. To meet projected demand for medical and recreational cannabis products, the yield gap must be closed with the use of modern scientific tools.
Cannabis is one of the oldest cultivated crops and is used for food (seeds), fiber (stems), and drugs (flowers); it was domesticated in Central Asia over 6,000 BCE (Li, 1973; Mercuri et al., 2002; Clarke and Merlin, 2013, 2016). This genus produces over 200 secondary metabolites, including terpenes, phenolic acids and cannabinoids (Andre et al., 2016). In particular, medical and recreational cannabis are cultivated for, tetrahydrocannabinol (THC), and cannabidiol (CBD), which produce physiological and intoxicating effects in humans, which have been associated with both positive and negative health outcomes (Hill et al., 2012; Giacoppo et al., 2014; Volkow et al., 2014; Burstein, 2015; Van Amsterdam et al., 2015). Because cannabis naturally contains THC and CBD, this plant has been listed as a controlled substance for the last several decades in jurisdictions worldwide. Restrictions around cultivation of this plant has led to a void of scientific research.
For cannabis, the yield gap constitutes the difference between the maximum possible flower yield compared to current yields obtained in commercial production. In addition, there is the important consideration of cannabinoid concentration and profile, which together determine the quality of the product. Legal cannabis-producing operations in Canada, show projected yields that range from 3.36 to 3590 g dry flower m−2 (Figure 1, Table S1) with MedReleaf achieving the highest yields per square meter. The first question that must be answered is: is this the physiological maximum of cannabis plants? The second question is which production conditions lead to obtaining these high yields? Another point requiring clarification is whether the most important yield is in fact the dry flowers (which contain the highest concentration of medicinal compounds) or the whole plant (for extraction of medicinal compounds, even from stems and leaves, which contain significantly lower concentrations).
To date, a limited number of studies have examined factors contributing to the cannabis yield gap. First, a body of literature has developed to provide a detailed knowledge base about existing cannabis strains, at the molecular level. Studies have begun to elucidate the genetic structure and diversity of cannabis (Sawler et al., 2015; Welling et al., 2016a), understand the inheritance of chemotype (De Meijer et al., 2003), and to catalog existing cannabis strains based on metabolomic fingerprinting methods and chemotaxonomy (Hazekamp et al., 2004, 2016; Hillig, 2004; Hillig and Mahlberg, 2004; Fischedick et al., 2010; Hazekamp and Fischedick, 2012). Some, but substantially less, research has investigated the impact of production methods on yield and cannabinoid profiles. This includes a study on the use of microbial inoculants (Winston et al., 2014), the role of light intensity and photoperiod (Chandra et al., 2011a, 2015), temperature (Chandra et al., 2011b), fertilization (Malceva et al., 2011; Caplan et al., 2017), physiological stresses (Lydon et al., 1987; Marti et al., 2014) and elicitors (Flores-Sanchez et al., 2009; Mansouri et al., 2009a,b, 2011, 2013, 2016; Mansouri and Asrar, 2012). These strategies have all played an important role in closing the yield gap in other crops and should be considered a good starting point for cannabis research.
In this meta-analysis, we examine the role of plant variety (genotype) and production conditions (plant density, light, fertilizer, temperature and duration of the flowering growth stage) on yield per plant, per square meter and per W of lighting, and THC and CBD yield per plant and per square meter. We describe currently available genomics and transcriptomics data for cannabis and how these can be used to produce a better understanding of the cannabis plant. We also examine the role of production conditions in predicting plant yields and examine the potential use of light emitting diodes and plant growth promoting rhizobacteria as novel production methods for obtaining high yields.
Materials and Methods
Data Collection
Data were collected as treatment means, based on variety, plant density (plants m−2), concentration of CO2 during cultivation, light intensity (W m−2 and photosynthetically active radiation, PAR, μmol m−2 s−1), light source (high pressure sodium, HPS, or fluorescent), photoperiod during vegetative growth and flowering stage (h), maximum temperature during growth (°C), and fertilizer rate (mg N L−1) from Vanhove et al. (2011, 2012), Potter and Duncombe (2012), Potter (2014), Caplan et al. (2017) and Conant et al. (2017) (Table S2). Based on availability, yield was recorded as either yield per plant, yield m−2 and/or yield W−1; percent THC and CBD in flowers at harvest were also recorded (Table S1). For data obtained from Potter and Duncombe (2012), yield m−2 was calculated by multiplying yield W−1 (g W−1) by light intensity (W m−2); yield plant−1 was calculated by multiplying yield m−2 by plant density (plants m−2). For data obtained from Vanhove et al. (2011, 2012), yield W−1 was calculated by dividing yield m−2 (g m−2) by light intensity (W m−2). For data obtained from Vanhove et al. (2011) and Potter and Duncombe (2012) THC yield (mg plant−1) was calculated by multiplying the proportion of THC in plant material (percent divided by 100) by the yield plant−1 (mg). For data obtained from Vanhove et al. (2011), THC yield m−2 (mg m−2) was calculated by multiplying the proportion of THC in plant material (percent divided by 100) by the yield m−2 (mg). For data obtained from Vanhove et al. (2011), CBD yield (mg plant−1) was calculated by multiplying the proportion of CBD in plant material (percent divided by 100) by the yield plant−1 (mg) and CBD yield m−2 (mg m−2) was calculated by multiplying the proportion of CBD in plant material (percent divided by 100) by the yield m−2 (mg). For yield W−1 data obtained from Potter and Duncombe (2012), data was extracted from figures using WebPlotDigitizer software (available at https://apps.automeris.io/wpd/).
Modeling Approach
Data used for analysis can be found in Table S3. All analyses were conducted using SAS 9.4 (SAS Institute Inc. 2013). Variables with excessive missingness (CO2 concentration (ppm), light intensity (PAR μmol m−2 s−1), fertilizer rate or inoculation with Mammoth PTM) were not considered. Tmax, photoperiod during vegetative growth and duration of the vegetative or flowering periods were highly correlated to other variables (|r| > 0.75) and were therefore not included in the analysis. Prior to analysis, the remaining variables were standardized (mean = 0 and standard deviation = 1) using PROC STANDARD and categorical variables (light type, fertilizer type or variety) were recoded as binary variables (0 or 1).
PROC REG, with the SELECTION = STEPWISE option, was used to stepwise select variables. The list of unselected variables included the experimental continuous variables (plant density, light intensity, duration of the flowering period, and pot size) and their squared effects, categorical variables (light type, fertilizer type, and variety), and the cross-products between the continuous and categorical variables. Models were then constructed using PROC GLIMMIX with stepwise selected variables. A distribution to model the residuals was selected by comparing model fit statistics between gamma, inverse Gaussian, shifted-t distribution, exponential, normal, and lognormal distributions and the model with the lowest Bayesian information criterion was selected. A random component was added to account for the source of the data. Components of the models that were not statistically significant (F-test p > 0.05) were removed sequentially until all variables remaining in the model were statistically significant. In some models, numerical class variables were classified as categorical variables to produce estimates for least squares-means.
Results
Models were constructed to describe yield plant−1, yield m−2, yield W−1, THC and CBD yield plant−1 and m−2. Given the high correlations, the effects of density cannot be separated from the effects of maximum temperature during cultivation and the photoperiod used during the vegetative growth period. Therefore, the effect of maximum temperature is interpreted as having the same effects as plant density, whereas the vegetative photoperiod had the inverse effect as density. Likewise, the effects of maximum temperature and duration of the vegetative growth period have effects that are the inverse of flowering duration effect. Because yield m−2 and W−1, THC m−2 and CBD m−2 are most relevant for industry, those results are highlighted here. Formulae to predict yield, THC and CBD plant−1 are found in the Supplementary File.
Based on the studied data, yield m−2 can be predicted using the formula:
where Fdur is duration of the flowering period on the statistically standardized scale, Ltype is light type (where 0 = HPS and 1 = MH) and VSS = 1 indicates Super Skunk. For varieties other than Super Skunk, plants grown under HPS lamps had higher yields m−2 than plants grown under MH lamps (p < 0.0001) and for other varieties grown under MH lamps, yields from Super Skunk plants were higher than for all other varieties (p = 0.0058) (Figure 2). Yield m−2 increased with increasing duration of the flowering period (p = 0.0005) (Figure 3A).
Yield W−1 can be predicted using the formula:
where D is plant density on the statistically standardized scale, VG1 = 1 indicates variety G1, VWW = 1 indicates White Widow, Lint is light intensity on the statistically standardized scale, VSH9 = 1 indicates Silver Haze #9, VEP = 1 indicates Early Pearly, Ftype is fertilizer type (where 0 = CannaTerra and 1 = slow release fertilizer), FD is duration of the flowering period on the statistically standardized scale, VNLX = 1 indicates Northern Lights #5 × Haze and VWB = 1 indicates White Berry. Increasing light intensity reduced yield W−1 but Silver Haze #9 produced higher yields W−1 compared to other varieties at 600 W m−2 and Early Pearly was less sensitive to this decrease compared to other varieties (p = 0.0006 and p = 0.0099, respectively) (Figure 4A). While increasing plant density reduced yield W−1, the effect was slightly different for G1 and White Widow compared to other varieties (p = 0.0133 and p = 0.0042, respectively) (Figure 5A). Yield W−1 was higher for plants grown using slow release fertilizer compared to the CannaTerra nutrient regime (p < 0.05) and when slow release fertilizer was applied, White Berry had higher yield W−1 than other varieties (p < 0.05) (Figure 6). For plants fertilized with CannaTerra, increased light intensity increased yield W−1 (p < 0.0001). Yield W−1 increased with flowering duration and this effect was stronger for the variety Northern Lights #5 × Haze than other varieties (p = 0.0013).
THC per m−2 can be described according to:
where Lint is light intensity on the statistically standardized scale, D is the plant density on the statistically standardized scale, VWa = 1 indicates Wappa, VWW = 1indicates White Widow, VBB = 1 indicates Big Bud, FD is the duration of the flowering period on the statistically standardized scale, VNLX = 1indicates Northern Lights #5 × Haze, PS is the pot size on the statistically standardized scale, Ftype is fertilizer type (where 0 = CannaTerra and 1 = slow release fertilizer) and VEP = 1 indicates Early Pearly. THC m−2 was lower at a light intensity of 400 W m−2 compared to 270 or 600 W m−2 (p = 0.0001) and this effect was stronger for Big Bud than for other varieties (p = 0.0116). Increasing the duration of the flowering period led to increased THC m−2 for varieties other than Northern Lights #5 × Haze (p = 0.0006). Increased plant density reduced THC m−2 for all varieties; this effect was stronger for White Widow than the other varieties (p = 0.0002) (Figure 5B). Increasing the pot size from 5 to 11 L reduced THC m−2 for White Widow but had a much smaller effect on other varieties (p = 0.0035) (Figure 7). Early Pearly produced lower THC m−2 compared other varieties when slow release fertilizer was applied (p = 0.0004) whereas for Super Skunk produced more THC m−2 compared to other varieties when either fertilizer was applied (p = 0.0017).
CBD m−2 can be described according to:
where Lint is light intensity (W m−2) and VWW = 1 indicates White Widow. White Widow responded differently to light intensity than other varieties (p = 0.0077); White Widow had lower CBD m−2 compared to other varieties at a light intensity of 600 W m−2, however this effect was not statistically significant (p > 0.05) (Figure 4B).
Discussion
Effect of Production Conditions on Yield and Cannabinoid Content
As highlighted in the data presented, yields obtained for cannabis are highly variable depending on variety, production conditions and production methods. Furthermore, these data highlight the discrepancy of yields obtained in industry compared to experimental settings. This stresses the importance of replicating industrial growing conditions in a research setting to allow for translation to the commercial grower setting. This applies equally to studies designed to enhance production based on traditional methods such as fertilization, lighting regimes, plant density and also to novel methods to be tested, including the use of plant-growth promoting rhizobacteria (PGPR) or LED-based lighting systems. This section describes what is currently known about cannabis cultivation in the scientific literature, with some references to industry norms, and also underlines areas of significant opportunity for scientific development relevant to the cannabis industry.
Plant Density, Pot Size and Fertilizer Regime Affect Yield per W and THC Yield
The results of the meta-analysis highlight the impact of production conditions on cannabis yield per plant, per square meter and per W of lighting. While increasing plant density reduced yield per W and THC per square meter, plant density was not an effective predictor of yield per square meter (Figure 5). The experimental designs used cannot quantify the relative contribution of increasing maximum temperature and/or shortening of the vegetative photoperiod compared to increasing plant density; these factors should be studied in more detail in future experiments. Furthermore, Chandra et al. (2008) recorded a maximum rate of photosynthesis for C. sativa grown at 30°C, compared to plants grown at 20–40°C, which explains how yield per square meter are maintained even at higher temperatures. Furthermore, the slightly stressful conditions of increased plant density and maximum temperature may contribute to increased THC accumulation. Previously, accumulated THC increased in response to the application of abscisic acid, a plant stress hormone (Table 1) (Mansouri et al., 2009a, Mansouri et al., 2012). Increasing pot size reduced THC per square meter, especially for the variety White Widow (Figure 7).
| Elicitor | Elicitor concentration | Main result | Form of C. sativa | References |
|---|---|---|---|---|
| Yeast extract | 10 mg mL−1 | Shifts in metabolites were observed but cannabinoid biosynthesis appeared to be absent | Hairy root cell culture | Flores-Sanchez et al., 2009 |
| Pythium aphanidermatum | 4 and 8 g mL−1 | |||
| Botrytis cinerea | 4 and 8 g mL−1 | |||
| Salicylic acid | 0.3, 0.5, 1 mM | |||
| Methyl jasmonate | 0.3 mM | |||
| Jasmonic acid | 100 μM | |||
| Cannabis pectin extract | 84 μg mL−1 | |||
| Cannabis pectin hydrolyzed | 2 mL aliquot | |||
| Pectin | 0.1 mg mL−1 | |||
| Sodium alginate | 150 μg mL−1 | |||
| AgNO3 | 50 and 100 μM | |||
| CoCl2-6H2O | 50 and 100 μM | |||
| NiSO4-6H2O | 50 and 100 μM | |||
| UV 302 nm | 30 s | |||
| UV 366 nm | 30 min | |||
| Absisic acid | 1, 10 mg L−1 | Increased THC | Whole plants | Mansouri et al., 2009b |
| 1, 10 μM | Increased cannabichrome, cannabinol | Whole plants | Mansouri and Asrar, 2012 | |
| Cycocel | 500, 1000, 1500 mg L−1 | Increased/decreased THC, CBD depending on tissue, treatment concentration, plant sex | Whole plants | Mansouri and Rohani, 2014 |
| Ethephon | 1, 5, 10, 100 μM | Increased cannabinoids in male and female plants | Whole plants | Mansouri et al., 2013 |
| 1, 5, 10, 100 μM | Increased THC, decreased CBD | Whole plants | Mansouri et al., 2016 | |
| Gibberellic acid | 5, 10, 30, 70, 100 μM | Increased THC, CBD | Whole plants | Mansouri et al., 2011 |
| 50, 100 μM | Decreased THC | Whole plants | Mansouri et al., 2009a | |
| Mevinolin | 0.1, 1, 10 μM | Decreased THC | Whole plants | Mansouri and Salari, 2014 |
Interestingly, fertilizer type (CannaTerra compared to slow release fertilizer) affected yield per W (Figure 6) and THC per square meter but did not affect yield per plant or per square meter. This result are likely due to differences in nutrient concentration, the balance of plant nutrients, timing of application highlighting the important need to develop adequate nutrient regimes for cannabis. Caplan et al. (2017) provided the first publication on this topic and demonstrated that when a liquid organic fertilizer (4.0N - 1.3P - 1.7K) was applied at a rate of 389 mg N L−1 and 418 mg N L−1 during the vegetative growth stage, yield and THC concentration in dry flower biomass were optimized, respectively, for container-grown “OG Kush × Grizzly” plants on two coir-based substrates. Future studies should examine the effects of individual plant nutrients and their interactions on crop and cannabinoid yields, and studies should be expanded to include a wider range of cannabis growth stages, varieties and growing substrates.
Light Intensity, Quality, and Duration of the Flowering Period Affect Flower and Cannabinoid Yield
Yield per square meter was higher when HPS lamps were used than when MH lamps were used (Figure 2). This is likely due to the lower luminous efficiency (i.e., lower light output per W) for MH lamps than HPS lamps (Eichhorn Bilodeau et al., 2019). This results in lower photosynthetic photon flux density (PPFD) for MH than HPS lamps, even if the W m−2 of the lamp is equivalent. THC and CBD per square meter increased with light intensity while yield per W decreased with increasing light intensity (Figure 4). The increased accumulation of THC and CBD at 600 W m−2 suggest that these compounds are produced to limit the effects of light stress at higher light intensities as a result of a stress response (Mansouri et al., 2009b; Mansouri et al., 2012). Our results also clearly indicate that increasing the duration of the flowering period (or reducing the duration of the vegetative period) increases yield per square meter and THC per square meter (Figure 3), a result which Vanhove et al. (2012) attributed to increased photosynthetic assimilation directed to bud growth instead of stem and leaf growth.
Light quality, intensity, source and photoperiod play a critical role in yield and quality of cannabis. Often, yield is reported as g W−1, as a measure of energy efficiency of the growing system. Literature values report yields of 0.3122–1.972 g W−1, and are influenced by strain, light intensity and plant density (Toonen et al., 2006; Vanhove et al., 2011, 2012; Potter and Duncombe, 2012). Furthermore, plants, including cannabis, are sensitive to the spectral composition of their source of light, which elicits specific effects on photosynthesis, photomorphogenesis, phototropism, and photonasty (Tamulaitis et al., 2005; Hogewoning et al., 2010). Use of electrical lighting systems with different spectral outputs is common in plant research and greenhouse horticulture. Most commonly, high pressure sodium (HPS) gas discharge lamps and fluorescent tubes are used (Hogewoning et al., 2010). Although the spectral emissions of these lights span the entire spectrum of sunlight, they feature distinct wavelength patterns (Hogewoning et al., 2010). HPS lights generally emit light most strongly in the yellow-red end of the spectrum, which is absorbed by chlorophyll and used in photosynthesis. Improvements in the blue component of HPS lights can improve light suitability for plant growth, however modifications are required to optimize the red spectrum of their emissions to enhance plant growth (Tamulaitis et al., 2005). These changes would reduce the energy lost as infrared radiation or heat. In contrast, fluorescent tubes have peaks throughout the spectrum but lack emissions in the far-red region of the spectrum (Tamulaitis et al., 2005). High power light emitting diodes (LEDs) are an emerging versatile electrical light source offering many advantages over conventional electrical light sources, including high energy efficiency, long life, and especially, the possibility to test the effects of many spectral combinations of wavelengths on plant growth and development. This could eventually lead to determination of the ideal light emission spectrum, allowing for lighting system designs tailored to enhance plant growth while minimizing associated energy costs (Tamulaitis et al., 2005). In the meantime, studies have begun to exploit the spectral elasticity of LEDs to examine the effects of different wavelength-light combinations on plant growth. The possibility of achieving higher irradiance at isolated wavelengths of light than with monochromatic light previously obtained through filters, could allow more accurate assessments of plant physiological responses (Lefsrud et al., 2008).
The optimal spectrum of light to achieve optimal yields of cannabis and cannabinoids remains to be fully elucidated. Environmental factors, such as temperature and irradiance levels, can have strong effects on plant growth and the accumulation of pigments critical for photosynthesis (Lefsrud et al., 2005, 2006). Chandra et al. (2008) discussed photosynthetic and water-use efficiency responses of cannabis to light, CO2 and temperature levels. The study demonstrated that maximum rate of photosynthesis occurs at 30°C, 750 μmol CO2 mol−1, and under 1,500 μmol m−2 s−1. The study concluded that high intensity lighting, in drier and CO2 enriched environments promotes higher photosynthetic activity, water use efficiency, and nearly constant internal to ambient CO2 concentration in cannabis.
Another challenge associated with lighting systems is that light intensity decreases with depth within the plant canopy as leaves absorb the light (Massa et al., 2005). In HPS and overhead LED lighting systems, the top of the canopy is often light saturated, yet the canopy as a whole is light limited. Providing additional light to the lower canopy increases the proportion of light used for photosynthesis without exceeding the point of photosynthetic light saturation (Massa et al., 2005). Unlike HPS lamps, LEDs emit little heat and can be placed close to the crop without burning leaves, meaning they are a practical interlighting system in commercial settings. For example, LEDs located within a cowpea (Vigna unguicultata L. Walp.) canopy improved biomass production by 33 %, compared to plants grown under overhead lights; intercanopy lights were also associated with an increased energy conversion rate (Massa et al., 2005). Hawley (2018) demonstrated that supplemental sub-canopy lighting (SCL) can increase cannabis bud yield and modify cannabinoid and terpene profiles. The increase in bud yield is assumed to be related to increased photosynthetic photon flux densities (PPFD) compared to production with overhead lighting alone. Red and blue SCL yielded a more consistent metabolite profile throughout the canopy, whereas red, green and blue SCL had the greatest impact on metabolite upregulation. A light spectrum with comparatively more green light drove plants to produce more carotenoids to manage green wavelengths, and consequently up-regulated other related terpenes in the process.
The effects of LEDs on plant growth and photomorphogenesis has been studied in plant species other than cannabis, with emphasis on the control of flowering and/or the duration of the blooming period. Physiological studies have shown that light quality, quantity and duration regulate flowering (Bula et al., 1991; Tennessen et al., 1994). According to Guo et al. (1998) and Thomas and Vince-Prue (1996), red light can inhibit flowering via red-light receptors such as phytochromes, which absorb light effectively at wavelengths above 600 nm (Kelly and Lagarias, 1985). In contrast, blue light can inhibit flowering via blue-light receptors such as cryptochromes, which absorb light well at wavelengths below 500 nm (Lin et al., 1995; Banerjee et al., 2007; Eichhorn Bilodeau et al., 2019).
A study on cannabis demonstrates that flowering time is determined by photoperiod: flowering is induced when day length is shorter than 12 h (Potter, 2014). While light quality influences on cannabis flowering have not yet been studied, light quality has been shown to influence flowering and duration of the blooming period in marigold (Tagetes erecta L. cv. Orange Boy) and salvia plants (Salvia splendens F. Sello ex Ruem & Schult. cv. Red Vista) (Heo et al., 2002). The number of visible flower buds in marigold was approximately five times higher in the presence of fluorescent light (with or without red LED) than under monochromic blue or red light. Monochromic blue or red light were found to suppress bud formation in salvia while fluorescent light plus far-red light was also found to inhibit flower bud formation in marigold. Day-extension using red or blue LEDs inhibited flower and bud appearances. Night-break treatment with red LEDs also delayed flower bud appearance in okra (Abelmoschus esculentus L. Moench) and a cultivar of native rosella (Abelmoschus moschatus ssp. tuberosus Span Borss). Night break with green light delayed flowering more strongly than blue light, but slightly less than red light (Hamamoto and Yamazaki, 2009). In long-day plants, experiments suggest that flowering is promoted most when red light is delivered during the early part of the photoperiod and far red light toward the end of the photoperiod (Lane et al., 1965; Evans, 1976; Kadman-Zahavi and Ephrat, 1976; Thomas and Vince-Prue, 1996). However, cannabis is a short-day plant, so it remains unclear whether these results are relevant for cannabis production.
Effect of Variety on Crop Yield and Cannabinoid Content
The results of the meta-analysis show that yield per square meter and per W and accumulation of THC and CBD vary based on plant variety. Sawler et al. (2015) showed that variety name does not always correspond to genotype, as so it is critical that future reports, document the genotype used to allow for comparison of results from different studies. It is also worth highlighting that while Silver Haze #9 stands out as a top-yielding variety, it was pruned differently than other varieties included in the same study. Therefore, the high yields of this variety may be related to pruning rather than to its genotype and both possibilities should be investigated in future research. Our results confirm the findings of Vanhove et al. (2012), who showed that varieties respond differently to changes in production conditions, as evidenced by multiple significant variety-by-production condition interaction effects.
Cannabis Genetic and Chemical Diversity
Cannabis plants are be classified as indica, sativa, and ruderalis. Lack of scientific consensus means these terms refer to cannabinoid content, morphology, allele frequencies or provenance (Hillig, 2005; Dufresnes et al., 2017). Historically, hemp-type (high in cannabidiolic acid, CBDA) and medical/recreational-type (often called marijuana, high in tetrahydrocannabinolic acid, THCA) strains have been categorized by their chemotype. For example, hemp is legally defined by EU and Canadian regulations as containing <0.3% THC (Canada, 1998). Species level classification of Cannabis plants is complicated by the lack of reproductive barriers between individuals conventionally described as subspecies, phenotypic plasticity, strong artificial selection for fiber-type and drug-type plants, as well as mixing of wild and cultivated populations since antiquity (Sawler et al., 2015; Clarke and Merlin, 2016; Grassa et al., 2018). More recently, genomic and transcriptomic distinctions between hemp and medical/recreational cannabis have been made (Piluzza et al., 2013; Sawler et al., 2015). Sawler et al. (2015) identified ~14,000 single-nucleotide polymorphisms that distinguished hemp-type and medical/recreational-type plants. Welling et al. (2016a) used genomic markers to predict the cannabinoid profile of 22 Cannabis accessions with over 98% accuracy, thereby confirming the genetic underpinning of chemotype.
The Cannabis genome is diploid (2n = 20) with nine autosomal chromosome pairs and one pair of XY sex chromosomes (Sakamoto et al., 1998; Divashuk et al., 2014). The nuclear genome was characterized and determined to be ~1,636 Mb for female plants (XX) and 1,683 Mb for male plants (XY) (Sakamoto et al., 1998). In 2011, the first draft haploid genome sequences were published (Van Bakel et al., 2011). These included a female clone of the drug-type cultivar Purple Kush, and a female plant of the fiber-type cultivar Finola (Van Bakel et al., 2011). Theses genomes were assembled from Illumina paired-end (6 libraries with median insert sizes ranging from 220 to 600 bp), Illumina mate-pair (2 libraries with median insert sizes of 1.8 and 4.6 kb), and 454 mate-pair (11 libraries with median insert sizes ranging from 8 to 80 kb) libraries (Van Bakel et al., 2011). The assembled Purple Kush genome was 786.6 Mb including 252 Mb of gaps. The presence of gaps in the genome was attributed to high repeat content and to high sequence variation in the cannabis genomes. More recently, an ultra-high-density genetic map was generated for Cannabis using a combination of long and short read sequencing technologies across parental, F1, and 96 recombinant F2 individuals (Grassa et al., 2018). Long-read technologies, including those from PacBio, have been used to sequence through repetitive regions, in order to close sequencing gaps in a number of plant species. Several long-read cannabis genome sequences have been contributed to the NCBI Genome repository. None of these sequences are associated with peer-review publications, nor are they presented as assembled or annotated genomes. Additionally, more than 1,500 short-read genome sequencing samples have been deposited in NCBI, including whole genome sequences, genotype by sequence, and short read assemblies. Many of these accessions are not associated with publications, and lack metadata to permit their full use by the research community. In spite of the lack of metadata, these genome accessions can be used to examine variation in the genomes of a range of cannabis cultivars.
The first published cannabis transcriptomes were synthesized from the roots, stems, vegetative shoots, pre-flowers and flowers of Purple Kush; more than 18.8 Gb of poly-A+ RNA reads corresponding to 30,000 genes were identified (Van Bakel et al., 2011). Since then, a leaf tissue salinity response transcriptome has also been published (Liu et al., 2016). A slightly larger number of transcriptome studies exist for hemp-type cannabis plants (Behr et al., 2016; Booth et al., 2017; Guerriero et al., 2017). However, the functional characterization of the cannabis genome is still in its infancy.
Crop Improvement Using Genomics and Transcriptomics
The diverse uses of cannabis plants are reflected in the significant variation in their stalk height, seed size, fiber length, phytochemical concentrations, and sensitivity to day length (Clarke and Merlin, 2016). Many of these traits, including those typically attributed to indica, sativa and ruderalis-type plants (Gould, 2015), may be targeted for improvement using conventional or modern breeding technologies. Detailed knowledge of the variation that exists across the Cannabis genus is fundamentally important to any project aiming to improve cultivars. Several projects have characterized the genetic structure of small populations of cannabis (Gao et al., 2014; Sawler et al., 2015; Soorni et al., 2017), but this has not yet been done on a larger scale. This synthesis of the knowledge has not yet transpired as the illicit nature of the drug-type plant has delayed the establishment of a well-conserved and well-annotated germplasm with consistent nomenclature (Clarke and Merlin, 2016). There is a movement in the cannabis research community to preserve and analyze germplasm across the genus to facilitate research and breeding programs (Clarke and Merlin, 2016; Welling et al., 2016b; Small, 2018).
Starting in the 1990s, molecular markers for cannabis varieties were developed for forensic analysis of plant origin. Hemp breeders have since integrated molecular markers (namely sex-linked and chemotypic markers) to enhance marker-assisted selection (MAS) strategies for crop improvement (Mandolino and Carboni, 2004; Faux et al., 2016) and cannabis researchers have used QTL analysis to identify loci associated with THCA production (Weiblen et al., 2015). A number of marker sets have been generated for a variety of genetic loci including microsatellites (Dufresnes et al., 2017) and SNPs associated with traits of interest (Sawler et al., 2015; Lynch et al., 2016; Soorni et al., 2017). Following the advent of next-generation sequencing, QTL mapping and genome-wide association studies have become more feasible, which will accelerate the discovery of important markers. Due to the high phenotypic plasticity of cannabis, associations between markers and phenotypes must be carefully characterized (Salentijn et al., 2015). The advent of genome editing technologies also hold great promise for cannabis improvement as Agrobacterium mediated transformation protocols have been published (Feeney and Punja, 2003).
Efficient genome editing capabilities facilitated by the biotechnologies of CRISPR-Cas9 and related technologies hold great promise for targeted improvement of Cannabis cultivars. For these technologies to be implemented three companion methodologies must be established: (1) micropropagation; (2) efficient transformation; (3) plant regeneration. Micropropagation technologies are foundational to the Cannabis industry, where they are used primarily with the aim of propagating and expanding high value cannabis plants. For the purposes of biotechnology applications, it is necessary to develop and maintain cultures pluripoten stem cells as callus or cell suspension culture. Since the 1970s, a number of such protocols have been established for Cannabis (reviewed in Lata et al., 2017; Wróbel et al., 2018). Transformation of Cannabis cells using Agrobacterium tumafasciens and A. rhizogenes have been demonstrated starting in 2003 with the transformation of callus (Feeney and Punja, 2003) and more recently using callus derived from a variety of tissue types and cultivars (Slusarkiewicz-Jarzina et al., 2005; Wahby et al., 2013). Protocols for the transformation of Cannabis roots have also been established (Wahby et al., 2013). The primary and persistent challenge has been to regenerate plants from the transformed callus and explant tissue (Feeney and Punja, 2003); plant recovery rates range from <2% to more than 50% (Chaohua et al., 2016) depending on the protocol, starting tissue, and genotype used. To date, we are not aware of any published accounts of CRISPR mediated genome editing in Cannabis; this will undoubtedly not be the case for long.
Limitations of Available Cannabis Data
This meta-analysis was able to identify some key factors that contribute to cannabis yields. However, only three studies were included in the meta-analysis due to the fact that other published studies did not report sufficient information about growing conditions for inclusion in the models (Table S2). Furthermore, it remains difficult to determine the relationship between flower and cannabinoid yields due to the lack of consistent reporting of cannabinoid concentration or yield. Our results also show that light type, as a proxy for PPFD, has a significant impact on flower and CBD yields, which suggests that reporting of light intensity as W m−2 is insufficient on its own. Finally, the results of this meta-analysis show that yield per square meter obtained in scientific studies (Table S1) remains much lower than yield per square meter obtained in industry (Figure 1) suggesting that discrepancies remain between industry production practices and growing conditions used in scientific studies. This highlights the value of knowledge exchange between academia and industry.
Future Considerations in Cannabis Research
Diversification of Cultivation Systems for Cannabis
Currently, cultivation of medical cannabis is usually conducted in controlled environment growing rooms since they offer a higher degree of control over growth conditions, compared to greenhouse production. However, producers are beginning to produce cannabis for the recreational market under greenhouse conditions, as it allows for larger cultivation areas and the use of natural sunlight, which reduces heating and lighting costs. To date, literature is scarce around best practices for cannabis growing methods. Several cultivation methods are used within growing rooms, including traditional bench setups, aeroponics, and hydroponics. While, Potter (2014) reviewed growing conditions used in industry they did not provide comparisons of productivity based on growing methods. While growers are keen to obtain high yields in each growth cycle, another challenge is the ability to obtain the maximum number of growing cycles per year (personal communication).
With the adoption of the Cannabis Act, Health Canada regulations will allow for outdoor cultivation of cannabis. While differences certainly will exist, producers interested in outdoor production of cannabis could adopt knowledge developed for agronomic practices (fertilization, seeding rate, harvest time, etc.) for cultivation of hemp (Atal, 1961; Mechtler et al., 2004; Amaducci et al., 2008; Cosentino et al., 2012; Faux et al., 2013; Finnan and Burke, 2013a,b; Faux and Bertin, 2014; Aubin et al., 2015, 2016; Razumova et al., 2016). However, it remains unclear how these conditions will influence medical/recreational cannabis quality aspects (flower yield, cannabinoid concentration), which are different from hemp quality variables (seed yield, fiber content). Thus, these factors will need to be investigated in the context of field cultivation of medical/recreational cannabis. The remainder of this section focuses on factors that affect cannabis yield and quality in the context of indoor, controlled environment production.
Potential Role for Plant-Growth Promoting Rhizobacteria in Cannabis Production
The role of the phytomicrobiome in regulating plant growth has received significant attention in the recent scientific literature and has been the basis for many crop-yield-enhancing technologies (e.g., Backer et al., 2018). Several studies have surveyed the diversity of bacterial and fungal endophytes in medical/recreational cannabis and hemp and have found that colonization depends on the cannabis genotype, the plant tissue sampled and the timing of sample collection relative to the plant growth stage. Among plants sampled from India, Pakistan, the USA and Canada the most common bacterial genera associated with medical/recreational cannabis and hemp plants were Pseudomonas, Staphylococcus, Bacillus, Acinetobacter, Chryseobacterium, Enterobacter, and Microbacterium while Erwinia, Cedecia, Chryseobacterium, Enterobacter, Microbacterium were found but at lower frequencies (Gautam et al., 2013; Winston et al., 2014; Afzal et al., 2015; Scott et al., 2018). These studies also determined that the colonization frequency was highest for leaves, followed by stems and petioles, however, these studies did not consider bacteria residing in or near root tissue. Community composition was determined mainly by soil type while community structure was determined by cultivar. These results highlight the need for systemic studies of microbial diversity in cannabis, with time points spanning from seed germination through to maturity, including leaf, stem, petiole, flower, and root tissue.
Many of the isolates identified in the studies mentioned above tested positively in vitro for properties associated with plant growth promotion (siderophore, cellulose, organic acid, and/or indole-3-acetic acid production and/or P-solubilization). In planta, two isolates were able to increase canola (Brassica napus) root length under salt stress conditions Afzal et al. (2015), while other isolates did not increase growth variables of tomato (Solanum lycopersicum L.) or hemp seedlings (Scott et al., 2018). Bioprospecting from wild cannabis may reveal PGPR that improve cannabis growth (Kusari et al., 2017). Alternatively, PGPR isolated from other crops may provide significant potential for improving cannabis yields. For example, Conant et al. (2017) reported that Mammoth PTM, a consortium of P-mobilizing microorganisms, increased flower yield per plant by 16.3% from 15.9 g (control) to 18.5 g (with Mammoth PTM). Since P-solubilization is only one of a set of mechanisms that microbes can use to promote plant growth, these results represent a promising starting point and suggest that testing microbes that increase plant yield by other mechanisms is warranted. Additionally, PGPR from the genus Bacillus have been shown to accelerate time to flowering for crops such as banana (Musa acuminata cv. “Berangan”), marigold (Tagetes erecta L.) and carnation (Dianthus carophyllus L.) (Mia et al., 2005; Flores et al., 2007; Kumar et al., 2014). Achieving flowering in a shorter timespan would reduce the time to harvest for each growth cycle to help growers attain a higher number of harvests per year.
In addition to increasing dry flower yield, inoculation with PGPR has the potential to increase cannabinoid yield via elicitation; this has been previously demonstrated for secondary metabolites in other plant species (previously reviewed by Gorelick and Bernstein, 2017). Several studies, cataloged in Table 1, have tested the role of biotic and abiotic elicitors on the effects of cannabinoid biosynthesis, revealing the sensitivity of this pathway to external signals. In contrast, studies conducted by Mansouri et al. (2009a,b, 2011, 2013 and 2016), Mansouri and Asrar (2012), Mansouri and Rohani (2014) and Mansouri and Salari (2014) demonstrated that abscisic acid, cycocel, ethephon, gibberellic acid, and mevinolin can all alter cannabinoid biosynthesis. While Flores-Sanchez et al. (2009) tested a large number of elicitors for effects on cannabis hairy root cell cultures, this did not induce cannabinoid biosynthesis. Testing the same elicitors in whole plants could lead to up- or down-regulation of cannabinoid biosynthesis. Furthermore, it has been demonstrated that bacteria isolated from one crop or plant species can stimulate growth and induce systemic resistance other crop species (Smith et al., 2015; Fan, 2017). Therefore, bacteria isolated from other crop species could be tested for effects on cannabinoid biosynthesis in cannabis plants.
PGPR also offer the potential to close the yield gap by reducing yield losses due to plant pathogens. PGPR can reduce yield losses by (1) inhibiting pathogen growth in planta or in soil via antagonism, (2) inducing systemic resistance in the plant, (3) reducing contamination between growth cycles. Strong evidence exists in the scientific literature to support the first mechanism. Endophytes isolated cannabis plants demonstrated their potential antagonistic activity against Aspergillus flavus, Botrytis cinereal, Ceratocystis fimbriata, Colletotrichum gloeosporioides, Curvularia lunata, Fusarium oxysporum, Geotrichum candidum, Fusarium solani, Rhizoctonia solani, Sclerotinia sclerotiorum, and Trichothecium roseum, in vitro (Gautam et al., 2013; Kusari et al., 2013; Qadri et al., 2013; Scott et al., 2018). The second option, inducing ISR, is of particular interest in cannabis production given (1) the high susceptibility of flowers to infection by plant pathogens and (2) the necessity to maintain extremely low pesticide residue levels on flowers. However, this remains to be tested in cannabis. Finally, harnessing the biocontrol aspect of PGPR to clean growing rooms in between growth cycles could reduce the risk of contamination between batches and reduce time between growth cycles.
Several studies have already investigated the role of endophytes in cannabis growth and development; while data are still lacking about effects on growth and yield of cannabis and the accumulation of cannabinoids in response to plant inoculation with PGPR. In contrast, multiple reports have investigated the role of cannabis endophytes for biocontrol; these have demonstrated strong potential for control of fungal and bacterial pathogens in vitro. The role of cannabis endophytes for biocontrol remains to be tested in planta.
Conclusions
In order to increase cannabis yield per square meter and per W light, the results of this meta-analysis point to the use of (1) low plant density (≤12 plants per square meter), (2) a flowering period duration of 9 weeks, (3) the use of HPS lamps, (4) an adequate fertilizer regime, and (5) manipulating light intensity to preserve high energy efficiency vs. favor THC and CBD accumulation. Furthermore, our results demonstrate that cannabis varieties respond differently to production conditions. The vast amount of existing genomic and transcriptomic data can be used to catalog current cannabis diversity resulting from thousands of years of breeding and used to identify area for crop improvement. While these basic production conditions are further investigated, we also propose the use of additional technologies such as LEDs to increase power-use efficiency, and PGPR to increase nutrient efficiency and regulate cannabinoid yield.
Acknowledgments
The authors wish to acknowledge the editor and reviewers for their constructive feedback of this review.
Footnotes
Footnote Group
Supplementary Material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2019.00495/full#supplementary-material
References
Untitled section
References
- Afzal I., Shinwari Z. K., Iqrar I. (2015). Selective isolation and characterization of agriculturally beneficial endophytic bacteria from wild hemp using canola. Pak. J. Bot. 47, 1999–2008.
- Amaducci S., Zatta A., Pelatti F., Venturi G. (2008). Influence of agronomic factors on yield and quality of hemp (Cannabis sativa L.) fibre and implication for an innovative production system. Field Crops Res. 107, 161–169. 10.1016/j.fcr.2008.02.002
- Andre C. M., Hausman J. F., Guerriero G. (2016). Cannabis sativa: the plant of the thousand and one molecules. Front. Plant Sci. 7:19. 10.3389/fpls.2016.00019
- Atal C. K. (1961). Effect of gibberellin on the fibers of hemp. Econ. Bot. 15, 133–139. 10.1007/BF02904086
- Aubin M.-P., Seguin P., Vanasse A., Lalonde O., Tremblay G. F., Mustafa A. F., et al. (2016). Evaluation of eleven industrial hemp cultivars grown in eastern Canada. Agron. J. 108, 1972–1980. 10.2134/agronj2016.04.0217
- Aubin M.-P., Seguin P., Vanasse A., Tremblay G. F., Mustafa A. F., Charron J.-B. (2015). Industrial hemp response to nitrogen, phosphorus, and potassium fertilization. Crop Forage Turfgrass Manag. 1:cftm20150159. 10.2134/cftm2015.0159
- Backer R., Rokem J. S., Ilangumaran G., Lamont J., Praslickova D., Ricci E., et al. (2018). Plant growth-promoting rhizobacteria: context, mechanisms of action, and roadmap to commercialization of biostimulants for sustainable agriculture. Front. Plant Sci. 9:1473. 10.3389/fpls.2018.01473
- Banerjee R., Schleicher E., Meier S., Viana R. M., Pokorny R., Ahmad M., et al. (2007). The signaling state of Arabidopsis cryptochrome 2 contains flavin semiquinone. J. Biol. Chem. 282, 14916–14922. 10.1074/jbc.M700616200
- Behr M., Legay S., ŽiŽková E., Motyka V., Dobrev P. I., Hausman J.-F., et al. (2016). Studying secondary growth and bast fiber development: the hemp hypocotyl peeks behind the wall. Front. Plant Sci. 7:1733. 10.3389/fpls.2016.01733
- Booth J. K., Page J. E., Bohlmann J. (2017). Terpene synthases from Cannabis sativa. PLoS ONE 12:e0173911. 10.1371/journal.pone.0173911
- Bula R., Morrow R., Tibbitts T., Barta D., Ignatius R., Martin T. (1991). Light-emitting diodes as a radiation source for plants. HortScience 26, 203–205. 10.21273/HORTSCI.26.2.203
- Burstein S. (2015). Cannabidiol (CBD) and its analogs: a review of their effects on inflammation. Bioorg. Med. Chem. 23, 1377–1385. 10.1016/j.bmc.2015.01.059
- Canada (1998). Health Canada. Industrial Hemp Regulations. SOR/98-156. Ottawa, ON. Availble online at: https://laws-lois.justice.gc.ca/eng/regulations/SOR-98-156/FullText.html
- Canada (2001). Health Canada. Marihuana Medical Access Regulations. SOR-2001-227. Ottawa, ON. Available online at: https://laws-lois.justice.gc.ca/eng/regulations/SOR-2001-227/20060322/P1TT3xt3.html
- Canada (2013). Health Canada. Marihuana for Medical Purposes Regulations. SOR-2013-119. Ottawa, ON. Available online at: https://laws-lois.justice.gc.ca/eng/regulations/SOR-2013-119/20130607/P1TT3xt3.html
- Canada (2016). Health Canada. Access to cannabis for medical purposes regulations. SOR/2016-230. Ottawa, ON. Available online at: https://laws-lois.justice.gc.ca/eng/regulations/SOR-2016-230/FullText.html
- Canada (2018). Health Canada. Cannabis Act (S.C. 2018, c. 16). Ottawa, ON. Available online at: https://laws-lois.justice.gc.ca/eng/acts/C-24.5/FullText.html
- Caplan D., Dixon M., Youbin Z. (2017). Optimal rate of organic fertilizer during the vegetative-stage for cannabis grown in two coir-based substrates. HortScience 52, 1307–1312. 10.21273/HORTSCI11903-17
- Chandra S., Lata H., Khan I. A., Elsohly M. A. (2008). Photosynthetic response of Cannabis sativa L. to variations in photosynthetic photon flux densities, temperature and CO 2 conditions. Physiol. Mol. Biol. Plants 14, 299–306. 10.1007/s12298-008-0027-x
- Chandra S., Lata H., Khan I. A., Elsohly M. A. (2011a). Photosynthetic response of Cannabis sativa L., an important medicinal plant, to elevated levels of CO2. Physiol. Mol. Biol. Plants 17, 291–295. 10.1007/s12298-011-0066-6
- Chandra S., Lata H., Khan I. A., Elsohly M. A. (2011b). Temperature response of photosynthesis in different drug and fiber varieties of Cannabis sativa L. Physiol. Mol. Biol. Plants 17, 297–303. 10.1007/s12298-011-0068-4
- Chandra S., Lata H., Mehmedic Z., Khan I. A., Elsohly M. A. (2015). Light dependence of photosynthesis and water vapor exchange characteristics in different high Δ9-THC yielding varieties of Cannabis sativa L. J. Appl. Res. Med. Aromat. Plants 2, 39–47. 10.1016/j.jarmap.2015.03.002
- Chaohua C., Gonggu Z., Lining Z., Chunsheng G., Qing T., Jianhua C., et al. (2016). A rapid shoot regeneration protocol from the cotyledons of hemp (Cannabis sativa L.). Ind. Crops Prod. 83, 61–65. 10.1016/j.indcrop.2015.12.035
- Clarke R. C., Merlin M. D. (2013). Cannabis: Evolution and Ethnobotany. Berkley, MI; Los Angeles, CA: University of California Press.
- Clarke R. C., Merlin M. D. (2016). Cannabis domestication, breeding history, present-day genetic diversity, and future prospects. CRC Crit. Rev. Plant Sci. 35, 293–327. 10.1080/07352689.2016.1267498
- Conant R., Walsh R., Walsh M., Bell C., Wallenstein M. (2017). Effects of a Microbial Biostimulant, Mammoth PTM, on Cannabis sativa Bud Yield. J. Hortic. Forestry 4, 2376–0354.1000191. 10.4172/2376-0354.1000191
- Cosentino S. L., Testa G., Scordia D., Copani V. (2012). Sowing time and prediction of flowering of different hemp (Cannabis sativa L.) genotypes in southern Europe. Ind. Crops Prod. 37, 20–33. 10.1016/j.indcrop.2011.11.017
- De Meijer E. P., Bagatta M., Carboni A., Crucitti P., Moliterni V. C., Ranalli P., et al. (2003). The inheritance of chemical phenotype in Cannabis sativa L. Genetics 163, 335–346.
- Divashuk M. G., Alexandrov O. S., Razumova O. V., Kirov I. V., Karlov G. I. (2014). Molecular cytogenetic characterization of the dioecious Cannabis sativa with an XY chromosome sex determination system. PLoS ONE 9:e85118. 10.1371/journal.pone.0085118
- Dufresnes C., Jan C., Bienert F., Goudet J., Fumagalli L. (2017). Broad-scale genetic diversity of cannabis for forensic applications. PLoS ONE 12:e0170522. 10.1371/journal.pone.0170522
- Eichhorn Bilodeau S., Wu B.-S., Rufyikiri A.-S., Macpherson S., Lefsrud M. (2019). An update on plant photobiology and implications for cannabis production. Front. Plant Sci. 10:296 10.3389/fpls.2019.00296
- Evans L. (1976). Inflorescence initiation in Lolium temulentum L. XIV. The role of phytochrome in long day induction. Funct. Plant Biol. 3, 207–217. 10.1071/PP9760207
- Fan D. (2017). Isolation of Rhizobacteria in Southwestern Quebec, Canada: An Investigation of Their Impact on the Growth and Salinity Stress Alleviation in Arabidopsis thaliana and Crop plants. Ph.D. McGill University.
- Faux A.-M., Bertin P. (2014). Modelling approach for the quantitative variation of sex expression in monoecious hemp (Cannabis sativa L.). Plant Breed. 133, 782–787. 10.1111/pbr.12208
- Faux A.-M., Draye X., Flamand M.-C., Occre A., Bertin P. (2016). Identification of QTLs for sex expression in dioecious and monoecious hemp (Cannabis sativa L.). Euphytica 209, 357–376. 10.1007/s10681-016-1641-2
- Faux A. M., Draye X., Lambert R., D'andrimont R., Raulier P., Bertin P. (2013). The relationship of stem and seed yields to flowering phenology and sex expression in monoecious hemp (Cannabis sativa L.). Eur. J. Agronomy 47, 11–22. 10.1016/j.eja.2013.01.006
- Feeney M., Punja Z. (2003). Tissue culture and Agrobacterium-mediated transformation of hemp (Cannabis sativa L.). In Vitro Cell. Dev. Biol. Plant 39, 578–585. 10.1079/IVP2003454
- Finnan J., Burke B. (2013a). Nitrogen fertilization to optimize the greenhouse gas balance of hemp crops grown for biomass. GCB Bioenergy. 5, 701–712. 10.1111/gcbb.12045
- Finnan J., Burke B. (2013b). Potassium fertilization of hemp (Cannabis sativa). Ind. Crops Prod. 41, 419–422. 10.1016/j.indcrop.2012.04.055
- Fischedick J. T., Hazekamp A., Erkelens T., Choi Y. H., Verpoorte R. (2010). Metabolic fingerprinting of Cannabis sativa L., cannabinoids and terpenoids for chemotaxonomic and drug standardization purposes. Phytochemistry 71, 2058–2073. 10.1016/j.phytochem.2010.10.001
- Flores A. C., Luna A. A. E., Portugal V. O. (2007). Yield and quality enhancement of marigold flowers by inoculation with Bacillus subtilis and Glomus fasciculatum. J. Sust. Agric. 31, 21–31. 10.1300/J064v31n01_04
- Flores-Sanchez I. J., Pec J., Fei J., Choi Y. H., Dusek J., Verpoorte R. (2009). Elicitation studies in cell suspension cultures of Cannabis sativa L. J. Biotechnol. 143, 157–168. 10.1016/j.jbiotec.2009.05.006
- Gao C., Xin P., Cheng C., Tang Q., Chen P., Wang C., et al. (2014). Diversity analysis in Cannabis sativa based on large-scale development of expressed sequence tag-derived simple sequence repeat markers. PLoS ONE 9:e110638. 10.1371/journal.pone.0110638
- Gautam A. K., Kant M., Thakur Y. (2013). Isolation of endophytic fungi from Cannabis sativa and study their antifungal potential. Arch. Phytopathol. Plant Protect. 46, 627–635. 10.1080/03235408.2012.749696
- Giacoppo S., Mandolino G., Galuppo M., Bramanti P., Mazzon E. (2014). Cannabinoids: new promising agents in the treatment of neurological diseases. Molecules 19, 18781–18816. 10.3390/molecules191118781
- Gorelick J., Bernstein N. (2017). Chemical and physical elicitation for enhanced cannabinoid production in cannabis, in Cannabis sativa L. - Botany and Biotechnology, eds Chandra S., Lata H., Elsohly M. A. (Cham: Springer International Publishing; ), 439–456.
- Gould J. (2015). The cannabis crop. Nature 525, S2–S3. 10.1038/525S2a
- Grassa C. J., Wenger J. P., Dabney C., Poplawski S. G., Motley S. T., Michael T. P., et al. (2018). A complete Cannabis chromosome assembly and adaptive admixture for elevated cannabidiol (CBD) content). BioRxiv [Preprint]. 10.1101/458083
- Guerriero G., Behr M., Legay S., Mangeot-Peter L., Zorzan S., Ghoniem M., et al. (2017). Transcriptomic profiling of hemp bast fibres at different developmental stages. Sci. Rep. 7:4961. 10.1038/s41598-017-05200-8
- Guo H., Yang H., Mockler T. C., Lin C. (1998). Regulation of flowering time by Arabidopsis photoreceptors. Science 279, 1360–1363. 10.1126/science.279.5355.1360
- Hamamoto H., Yamazaki K. (2009). Reproductive response of okra and native rosella to long-day treatment with red, blue, and green light-emitting diode lights. HortScience 44, 1494–1497. 10.21273/HORTSCI.44.5.1494
- Hawley D. (2018). The Influence of Spectral Light Quality on Plant Secondary Metabolism and Photosynthetic Acclimation to Light Quality. Ph.D. Guelph University.
- Hazekamp A., Choi Y. H., Verpoorte R. (2004). Quantitative analysis of cannabinoids from Cannabis sativa using 1H-NMR. Chem. Pharm. Bull. 52, 718–721. 10.1248/cpb.52.718
- Hazekamp A., Fischedick J. T. (2012). Cannabis - from cultivar to chemovar. Drug Test. Anal. 4, 660–667. 10.1002/dta.407
- Hazekamp A., Tejkalová K., Papadimitriou S. (2016). Cannabis: from cultivar to chemovar II—a metabolomics approach to cannabis classification. Cannab. Cannab. Res. 1, 202–215. 10.1089/can.2016.0017
- Heo J., Lee C., Chakrabarty D., Paek K. (2002). Growth responses of marigold and salvia bedding plants as affected by monochromic or mixture radiation provided by a light-emitting diode (LED). Plant Growth Regul. 38, 225–230. 10.1023/A:1021523832488
- Hill A. J., Williams C. M., Whalley B. J., Stephens G. J. (2012). Phytocannabinoids as novel therapeutic agents in CNS disorders. Pharmacol. Ther. 133, 79–97. 10.1016/j.pharmthera.2011.09.002
- Hillig K. W. (2004). A chemotaxonomic analysis of terpenoid variation in Cannabis. Biochem. Syst. Ecol. 32, 875–891. 10.1016/j.bse.2004.04.004
- Hillig K. W. (2005). Genetic evidence for speciation in Cannabis (Cannabaceae). Genet. Resour. Crop Evol. 52, 161–180. 10.1007/s10722-003-4452-y
- Hillig K. W., Mahlberg P. G. (2004). A chemotaxonomic analysis of cannabinoid variation in Cannabis (Cannabaceae). Am. J. Bot. 91, 966–975. 10.3732/ajb.91.6.966
- Hogewoning S. W., Douwstra P., Trouwborst G., Van Ieperen W., Harbinson J. (2010). An artificial solar spectrum substantially alters plant development compared with usual climate room irradiance spectra. J. Exp. Bot. 61, 1267–1276. 10.1093/jxb/erq005
- Kadman-Zahavi A., Ephrat E. (1976). Development of plants in filtered sunlight. 2. effects of spectral composition, light intensity, daylength and red and far-red irradiations on long-and short-day grasses. Israel J. Bot. 25, 11–23.
- Kelly J. M., Lagarias J. C. (1985). Photochemistry of 124-kilodalton Avena phytochrome under constant illumination in vitro. Biochemistry 24, 6003–6010. 10.1021/bi00342a047
- Kumar P. R., Adhipathi P., Nakkeeran S. (2014). Antimicrobial peptide genes of PGPR for the management of Fusarium wilt of carnation under protected cultivation. J. Mycol. Platn Pathol. 44:54.
- Kusari P., Kusari S., Spiteller M., Kayser O. (2013). Endophytic fungi harbored in Cannabis sativa L.: diversity and potential as biocontrol agents against host plant-specific phytopathogens. Fungal Divers. 60, 137–151. 10.1007/s13225-012-0216-3
- Kusari P., Kusari S., Spiteller M., Kayser O. (2017). Cannabis endophytes and their application in breeding and physiological fitness, in Cannabis sativa L. - Botany and Biotechnology, eds Chandra S., Lata H., ElSohly M. A. (Cham: Springer International Publishing; ), 419–437.
- Lane H., Cathey H., Evans L. (1965). The dependence of flowering in several long-day plants on the spectral composition of light extending the photoperiod. Am. J. Bot. 52, 1006–1014. 10.1002/j.1537-2197.1965.tb07278.x
- Lata H., Chandra S., Khan I. A., ElSohly M. A. (2017). Micropropagation of Cannabis sativa L. – An Update, in Cannabis sativa L. – Botany and Biotechnology, eds Chandra S., Lata H., ElSohly M. A. (Cham: Springer International Publishing; ) 285–298.
- Lefsrud M. G., Kopsell D. A., Kopsell D. E., Curran-Celentano J. (2005). Air temperature affects biomass and carotenoid pigment accumulation in kale and spinach grown in a controlled environment. HortScience 40, 2026–2030. 10.21273/HORTSCI.40.7.2026
- Lefsrud M. G., Kopsell D. A., Kopsell D. E., Curran-Celentano J. (2006). Irradiance levels affect growth parameters and carotenoid pigments in kale and spinach grown in a controlled environment. Physiol. Plant. 127, 624–631. 10.1111/j.1399-3054.2006.00692.x
- Lefsrud M. G., Kopsell D. A., Sams C. E. (2008). Irradiance from distinct wavelength light-emitting diodes affect secondary metabolites in kale. HortScience 43, 2243–2244. 10.21273/HORTSCI.43.7.2243
- Li H.-L. (1973). An archaeological and historical account of cannabis in China. Econ. Bot. 28, 437–448. 10.1007/BF02862859
- Lin C., Robertson D. E., Ahmad M., Raibekas A. A., Jorns M. S., Dutton P. L., et al. (1995). Association of flavin adenine dinucleotide with the Arabidopsis blue light receptor CRY1. Science 269, 968–970. 10.1126/science.7638620
- Liu J., Qiao Q., Cheng X., Du G., Deng G., Zhao M., et al. (2016). Transcriptome differences between fiber-type and seed-type Cannabis sativa variety exposed to salinity. Physiol. Mol. Biol. Plants 22, 429–443. 10.1007/s12298-016-0381-z
- Lydon J., Teramura A. H., Coffman C. B. (1987). UV-B radiation effects on photosynthesis and cannabinoid production of two Cannabis sativa chemotypes. Photochem. Photobiol. 46, 201–206. 10.1111/j.1751-1097.1987.tb04757.x
- Lynch R. C., Vergara D., Tittes S., White K., Schwartz C. J., Gibbs M. J., et al. (2016). Genomic and chemical diversity in cannabis. CRC Crit. Rev. Plant Sci. 35, 349–363. 10.1080/07352689.2016.1265363
- Malceva M., Vikmane M., Stramkale V. (2011). Changes of photosynthesis-related parameters and productivity of Cannabis sativa under different nitrogen supply. Environ. Exp. Biol. 9, 61–69.
- Mandolino G., Carboni A. (2004). Potential of marker-assisted selection in hemp genetic improvement. Euphytica 140, 107–120. 10.1007/s10681-004-4759-6
- Mansouri H., Asrar Z. (2012). Effects of abscisic acid on content and biosynthesis of terpenoids in Cannabis sativa at vegetative stage. Biol. Plant. 56, 153–156. 10.1007/s10535-012-0033-2
- Mansouri H., Asrar Z., Amarowicz R. (2011). The response of terpenoids to exogenous gibberellic acid in Cannabis sativa L. at vegetative stage. Acta Physiol. Plant. 33, 1085–1091. 10.1007/s11738-010-0636-1
- Mansouri H., Asrar Z., Mehrabani M. (2009a). Effects of gibberellic acid on primary terpenoids and Δ9-Tetrahydrocannabinol in Cannabis sativa at flowering stage. J. Integr. Plant Biol. 51, 553–561. 10.1111/j.1744-7909.2009.00833.x
- Mansouri H., Asrar Z., Szopa J. (2009b). Effects of ABA on primary terpenoids and Δ9-tetrahydrocannabinol in Cannabis sativa L. at flowering stage. Plant Growth Regul. 58, 269–277. 10.1007/s10725-009-9375-y
- Mansouri H., Rohani M. (2014). Response of Cannabis sativa L. to foliar application of 2-chloro-ethyl-trimethyl-ammonium chloride. Plant Physiol. 5, 1225–1233.
- Mansouri H., Salari F. (2014). Influence of mevinolin on chloroplast terpenoids in Cannabis sativa. Physiol. Mol. Biol. Plants 20, 273–277. 10.1007/s12298-014-0222-x
- Mansouri H., Salari F., Asrar Z. (2013). Ethephon application stimulats cannabinoids and plastidic terpenoids production in Cannabis sativa at flowering stage. Ind. Crops Prod. 46, 269–273. 10.1016/j.indcrop.2013.01.025
- Mansouri H., Salari F., Asrar Z., Nasibi F. (2016). Effects of ethephon on terpenoids in Cannabis sativa L. in vegetative stage. J. Essen. Oil Bear. Plants 19, 94–102. 10.1080/0972060X.2015.1004122
- Marti G., Schnee S., Andrey Y., Simoes-Pires C., Carrupt P. A., Wolfender J. L., et al. (2014). Study of leaf metabolome modifications induced by UV-C radiations in representative Vitis, Cissus and Cannabis species by LC-MS based metabolomics and antioxidant assays. Molecules 19, 14004–14021. 10.3390/molecules190914004
- Massa G. D., Mitchell C. A., Emmerich J. C., Morrow R. C. (2005). Development of a reconfigurable LED plant-growth lighting system for equivalent system mass reduction in an ALS, in SAE Technical Paper (Rome: ). 10.4271/2005-01-2955
- Mechtler K., Bailer J., De Hueber K. (2004). Variations of Δ9-THC content in single plants of hemp varieties. Ind. Crops Prod. 19, 19–24. 10.1016/S0926-6690(03)00077-3
- Mercuri A. M., Accorsi C. A., Bandini Mazzanti M. (2002). The long history of Cannabis and its cultivation by the Romans in central Italy, shown by pollen records from Lago Albano and Lago di Nemi. Veg. Hist. Archaeobot. 11, 263–276. 10.1007/s003340200039
- Mia M. A. B., Shamsuddin Z. H., Wahab Z., Marziah M. (2005). High-yielding and quality banana production through plant growth-promoting rhizobacterial (PGPR) inoculation. Fruits 60, 179–185. 10.1051/fruits:2005024
- Piluzza G., Delogu G., Cabras A., Marceddu S., Bullitta S. (2013). Differentiation between fiber and drug types of hemp (Cannabis sativa L.) from a collection of wild and domesticated accessions. Genet. Resour. Crop Evol. 60, 2331–2342. 10.1007/s10722-013-0001-5
- Potter D. J. (2014). A review of the cultivation and processing of cannabis (Cannabis sativa L.) for production of prescription medicines in the UK. Drug Test. Anal. 6, 31–38. 10.1002/dta.1531
- Potter D. J., Duncombe P. (2012). The effect of electrical lighting power and irradiance on indoor-grown cannabis potency and yield. J. Forensic Sci. 57, 618–622. 10.1111/j.1556-4029.2011.02024.x
- Qadri M., Johri S., Shah B. A., Khajuria A., Sidiq T., Lattoo S. K., et al. (2013). Identification and bioactive potential of endophytic fungi isolated from selected plants of the Western Himalayas. SpringerPlus 2:8. 10.1186/2193-1801-2-8
- Razumova O. V., Alexandrov O. S., Divashuk M. G., Sukhorada T. I., Karlov G. I. (2016). Molecular cytogenetic analysis of monoecious hemp (Cannabis sativa L.) cultivars reveals its karyotype variations and sex chromosomes constitution. Protoplasma 253, 895–901. 10.1007/s00709-015-0851-0
- Sakamoto K., Akiyama Y., Fukui K., Kamada H., Satoh S. (1998). Characterization; genome sizes and morphology of sex chromosomes in hemp (Cannabis sativa L.). Cytologia 63, 459–464. 10.1508/cytologia.63.459
- Salentijn E. M., Zhang Q., Amaducci S., Yang M., Trindade L. M. (2015). New developments in fiber hemp (Cannabis sativa L.) breeding. Ind. Crops Prod. 68, 32–41. 10.1016/j.indcrop.2014.08.011
- Sawler J., Stout J. M., Gardner K. M., Hudson D., Vidmar J., Butler L., et al. (2015). The genetic structure of marijuana and hemp. PLoS ONE 10:e0133292. 10.1371/journal.pone.0133292
- Scott M., Rani M., Samsatly J., Charron J.-B., Jabaji S. (2018). Endophytes of industrial hemp (Cannabis sativa L.) cultivars: identification of culturable bacteria and fungi in leaves, petioles, and seeds. Can. J. Microbiol. 64, 1–17. 10.1139/cjm-2018-0108
- Slusarkiewicz-Jarzina A., Ponitka A., Kacsmarek Z. (2005). Influence of cultivar, explant source and plant growth regulator on callus induction and plant regeneration of Cannabis sativa L. Acta Biol. Cracoviensia 47, 145–151.
- Small E. (2018). Dwarf germplasm: the key to giant Cannabis hempseed and cannabinoid crops. Genet. Resour. Crop Evol. 65, 1071–1107. 10.1007/s10722-017-0597-y
- Smith D. L., Subramanian S., Lamont J. R., Bywater-Ekegard M. (2015). Signaling in the phytomicrobiome: breadth and potential. Front. Plant Sci. 6:709. 10.3389/fpls.2015.00709
- Soorni A., Fatahi R., Haak D. C., Salami S. A., Bombarely A. (2017). Assessment of genetic diversity and population structure in iranian cannabis germplasm. Sci. Rep. 7:15668. 10.1038/s41598-017-15816-5
- Tamulaitis G., Duchovskis P., Bliznikas Z., Breive K., Ulinskaite R., Brazaityte A. Žukauskas, A., et al. (2005). High-power light-emitting diode based facility for plant cultivation. J. Phys. D Appl. Phys. 38, 3182 10.1088/0022-3727/38/17/S20
- Tennessen D. J., Singsaas E. L., Sharkey T. D. (1994). Light-emitting diodes as a light source for photosynthesis research. Photosyn. Res. 39, 85–92. 10.1007/BF00027146
- Thomas B., Vince-Prue D. (1996). Photoperiodism in Plants. San Diego, CA: Elsevier.
- Toonen M., Ribot S., Thissen J. (2006). Yield of illicit indoor cannabis cultivation in The Netherlands. J. Forensic Sci. 51, 1050–1054. 10.1111/j.1556-4029.2006.00228.x
- Van Amsterdam J., Brunt T., Van Den Brink W. (2015). The adverse health effects of synthetic cannabinoids with emphasis on psychosis-like effects. J. Psychopharmacol. 29, 254–263. 10.1177/0269881114565142
- Van Bakel H., Stout J. M., Cote A. G., Tallon C. M., Sharpe A. G., Hughes T. R., et al. (2011). The draft genome and transcriptome of Cannabis sativa. Genome Biol. 12:R102. 10.1186/gb-2011-12-10-r102
- Vanhove W., Surmont T., Van Damme P., De Ruyver B. (2012). Yield and turnover of illicit indoor cannabis (Cannabis spp.) plantations in Belgium. Forensic Sci. Int. 220, 265–270. 10.1016/j.forsciint.2012.03.013
- Vanhove W., Van Damme P., Meert N. (2011). Factors determining yield and quality of illicit indoor cannabis (Cannabis spp.) production. Forensic Sci. Int. 212, 158–163. 10.1016/j.forsciint.2011.06.006
- Volkow N. D., Baler R. D., Compton W. M., Weiss S. R. (2014). Adverse health effects of marijuana use. N. Engl. J. Med. 370, 2219–2227. 10.1056/NEJMra1402309
- Wahby I., Caba J. M., Ligero F. (2013). Agrobacterium infection of hemp (Cannabis sativa L.): establishment of hairy root cultures. J. Plant Interact. 8, 312–320. 10.1080/17429145.2012.746399
- Weiblen G. D., Wenger J. P., Craft K. J., Elsohly M. A., Mehmedic Z., Treiber E. L., et al. (2015). Gene duplication and divergence affecting drug content in Cannabis sativa. N. Phytol. 208, 1241–1250. 10.1111/nph.13562
- Welling M. T., Liu L., Shapter T., Raymond C. A., King G. J. (2016a). Characterisation of cannabinoid composition in a diverse Cannabis sativa L. germplasm collection. Euphytica 208, 463–475. 10.1007/s10681-015-1585-y
- Welling M. T., Shapter T., Rose T. J., Liu L., Stanger R., King G. J. (2016b). A belated green revolution for Cannabis: virtual genetic resources to fast-track cultivar development. Front. Plant Sci. 7:1113. 10.3389/fpls.2016.01113
- Winston M. E., Hampton-Marcell J., Zarraonaindia I., Owens S. M., Moreau C. S., Gilbert J. A., et al. (2014). Understanding cultivar-specificity and soil determinants of the cannabis microbiome. PLoS ONE 9:e99641. 10.1371/journal.pone.0099641
- Wróbel T., Dreger M., Wielgus K., Słomski R. (2018). The application of plant in vitro cultures in cannabinoid production. Biotechnol. Lett. 40, 445–454. 10.1007/s10529-017-2492-1